Manhasset Symphony music stand - box of 6

The desk can tilt fully back to make the stand easier to carry and store, but the base does not collapse. Choose the Voyager when a stand must regularly pack down for transport.

The standard Symphony weighs approximately 3.4 kg, or 7.5 lb.

The Symphony Model 48 is Manhasset's classic and most popular music stand. It combines a full-sized solid desk, a stable welded base and smooth knob-free height and angle adjustment.

The desk ledge adjusts from approximately 26 to 48 inches from the floor, around 66 to 122 cm. The adjustment is continuous, so it can be set at any point within that range.

The desk is approximately 20 inches wide by 12.5 inches high, with a 2.25-inch ledge. This provides plenty of room for sheet music, folders and many music books.

It is an excellent all-round stand for schools, orchestras, bands, rehearsal rooms, studios and home musicians. It is particularly suited to settings where strength and reliability matter more than compact folding.

Its standard height and desk suit most players, while Concertino, Tall, Orchestral and conductor models can be added only where a specialist position requires them.

It is stable, quick for pupils to adjust and built to withstand regular classroom use. Its simple mechanism also avoids the loose knobs and clamps commonly found on lighter stands.

Often, yes. Replacement parts are available for many models, and worn cosmetic finishes can sometimes be carefully prepared and refinished. Avoid altering working mechanisms in a way that could affect safety or warranty coverage.

Wipe the desk, shaft and base with a soft, slightly damp cloth, then dry them. Avoid abrasive cleaners, solvents and products that could damage the powder-coated finish or enter the clutch mechanism.

No. Do not apply oil or lubricant to the height-adjustment shaft, as this can reduce the holding power of the friction-grip clutch.

Check the carton and packing materials carefully, as small fixings can remain inside. Contact the supplying retailer promptly with the model and order details if anything is missing.

The tapered nut inside the shaft may have become unseated during transport. Fully compress the shaft, remove the base bolt, firmly tap the chrome end on a hard surface to reseat the nut, then reassemble and tighten the bolt.

Do not add lubricant to the outside of the shaft. Follow the model-specific troubleshooting instructions or contact Manhasset UK for guidance.

Yes, in fact Manhasset UK specialises in providing large quotes for schools and venues. Send your requirements to sales@frederickhyde.com and we will get back to you promptly.

Yes. Availability varies across the wider Manhasset range, but the UK team can check whether a specialist model, finish or replacement part can be ordered.

Yes. Frederick Hyde Music Distribution handles UK trade and dealer enquiries. Email sales@frederickhyde.com or call 01428 653381.

Email sales@frederickhyde.com or call 01428 653381. Our friendly team can help with product selection, availability, quotations and after-sales support.

The Frederick Hyde sales team is available Monday to Friday, 9:00am to 5:30pm, excluding public holidays.

Provide the stand model, approximate age, the part required, photographs of the stand and your delivery location. This helps the team identify the correct component.

Contact the supplying retailer first, or email sales@frederickhyde.com with proof of purchase, the model number, a description of the fault and clear photographs.

Email sales@frederickhyde.com or call 01428 653381 and we would be more than happy to help.

No. Under the manufacturer's current warranty, music stand carts are covered for 10 years and music accessories are generally covered for one year. Rechargeable LED lamps are also covered for one year, excluding normal battery-pack life.

Yes. Keep your order confirmation, invoice or receipt, as proof of purchase may be required to confirm the purchaser and purchase date.

Manhasset music stands purchased in 2012 or later are covered against defects in materials or workmanship for the lifetime of the original purchaser, subject to the manufacturer's warranty terms.

Contact Manhasset UK or the retailer that supplied the product with your proof of purchase, model details and a clear description of the problem. Photos may be requested, and the product should not be returned until instructions have been provided.

It means the period during which the original purchaser continues to own the music stand. The warranty does not automatically transfer to a later owner.

It covers faults that Manhasset determines were caused by defective materials or workmanship during the applicable warranty period.

The warranty excludes shipping damage, neglect, misuse, abuse, normal wear and tear, unauthorised alterations and consumable components such as bulbs or batteries.

The manufacturer's stated warranty for music stands purchased before 2012 is 10 years from the original purchase date.

If a fault is accepted as covered by the warranty, Manhasset may choose to repair or replace the defective product without charge to the original purchaser.

A durable product that can be maintained and repaired may need replacing far less often. That long service life can reduce waste compared with repeatedly buying short-lived stands.

Yes. Replacement desks, shafts, bases and other components are available for many models, so damage to one part does not necessarily mean replacing the complete stand.

Yes. The same qualities that help in a school, including stability, simple adjustment and durability, are equally valuable in studios, orchestras, theatres and concert halls.

Yes. The broad desk and deep ledge can support folders, books, tablets and rehearsal notes, provided the total load stays within the stand's rated capacity.

The people making the stands have a direct stake in the company and its reputation, reinforcing the care, consistency and pride behind production.

Classic models use a heavy-gauge welded steel base designed to provide dependable balance and withstand repeated institutional use.

It allows the desk angle to be changed smoothly and held in position without loosening and retightening a separate handle.

Many classic models use a lightweight tempered aluminium desk that combines rigidity with manageable weight. Specialist models may use materials such as durable ABS or clear polycarbonate.

It is the internal friction mechanism that lets the desk move up or down with a simple push or pull, then holds it securely without a tightening knob.

Manhasset stands are made in Yakima, Washington, where the company has been based since the early 1940s.

Removing external height and angle knobs makes adjustment faster and reduces the number of small parts that can loosen, break or go missing during everyday use.

It reflects the manufacturer's confidence in the materials and workmanship. It also gives the original purchaser a clear route to repair or replacement if an eligible manufacturing defect develops.

Manhasset stands are built as long-term equipment, not a temporary accessory. Their robust construction, replaceable parts and lifetime warranty for qualifying music stands mean one purchase can support decades of music-making.

The solid rectangular desk, three-foot base and knob-free shaft have been used in music rooms and performance venues for generations, making the design instantly familiar to many musicians.

Selected models are available in a range of powder-coated colours, although UK availability varies. Custom colours may also be possible for larger projects, subject to quantity and lead time.

Standard Manhasset stands are robust but still manageable to carry between rooms. They are not designed to fold as small as a wire stand, so the Voyager with a foldable base is the better choice for frequent travel.

Yes. Manhasset stands are widely used in orchestras, theatres, studios, rehearsal rooms and concert venues because they provide a stable, dependable surface for music.

Yes. Their stable bases, simple one-handed adjustment and robust construction make them particularly well suited to classrooms, rehearsal rooms, ensembles and music departments.

Most floor stands arrive in three sections: The base, shaft, and desk, and require straightforward assembly. The necessary fixings are supplied, and model-specific instructions are available.