Manhasset Tall Symphony music stand

It can, but its minimum ledge height is much higher than a standard Symphony stand. Most seated musicians will find the standard or Concertino model more comfortable.

Yes. It uses the same heavy-gauge welded base and proven stand design as the standard Symphony, although any tall stand should be positioned carefully on a level floor.

Yes. Its higher adjustment range allows the music to be placed comfortably for a standing double bassist without balancing a standard stand on a platform.

Yes. The extra 30 cm of shaft height helps compensate for raised staging while keeping the desk at a practical reading level.

It has an approximately 51 x 32 cm desk and weighs about 3.6 kg, or 8 lb. The shaft is around 30 cm taller than the standard Symphony version.

The desk ledge adjusts from approximately 97 to 152 cm from the floor, or 38 to 60 inches.

It is stable, quick for pupils to adjust and built to withstand regular classroom use. Its simple mechanism also avoids the loose knobs and clamps commonly found on lighter stands.

Its standard height and desk suit most players, while Concertino, Tall, Orchestral and conductor models can be added only where a specialist position requires them.

It is an excellent all-round stand for schools, orchestras, bands, rehearsal rooms, studios and home musicians. It is particularly suited to settings where strength and reliability matter more than compact folding.

The desk is approximately 20 inches wide by 12.5 inches high, with a 2.25-inch ledge. This provides plenty of room for sheet music, folders and many music books.

The Symphony Model 48 is Manhasset's classic and most popular music stand. It combines a full-sized solid desk, a stable welded base and smooth knob-free height and angle adjustment.

The desk ledge adjusts from approximately 26 to 48 inches from the floor, around 66 to 122 cm. The adjustment is continuous, so it can be set at any point within that range.

The standard Symphony weighs approximately 3.4 kg, or 7.5 lb.

No. Under the manufacturer's current warranty, music stand carts are covered for 10 years and music accessories are generally covered for one year. Rechargeable LED lamps are also covered for one year, excluding normal battery-pack life.

Yes. Keep your order confirmation, invoice or receipt, as proof of purchase may be required to confirm the purchaser and purchase date.

Manhasset music stands purchased in 2012 or later are covered against defects in materials or workmanship for the lifetime of the original purchaser, subject to the manufacturer's warranty terms.

Contact Manhasset UK or the retailer that supplied the product with your proof of purchase, model details and a clear description of the problem. Photos may be requested, and the product should not be returned until instructions have been provided.

It means the period during which the original purchaser continues to own the music stand. The warranty does not automatically transfer to a later owner.

It covers faults that Manhasset determines were caused by defective materials or workmanship during the applicable warranty period.

The warranty excludes shipping damage, neglect, misuse, abuse, normal wear and tear, unauthorised alterations and consumable components such as bulbs or batteries.

Often, yes. Replacement parts are available for many models, and worn cosmetic finishes can sometimes be carefully prepared and refinished. Avoid altering working mechanisms in a way that could affect safety or warranty coverage.

Wipe the desk, shaft and base with a soft, slightly damp cloth, then dry them. Avoid abrasive cleaners, solvents and products that could damage the powder-coated finish or enter the clutch mechanism.

No. Do not apply oil or lubricant to the height-adjustment shaft, as this can reduce the holding power of the friction-grip clutch.

Check the carton and packing materials carefully, as small fixings can remain inside. Contact the supplying retailer promptly with the model and order details if anything is missing.

The tapered nut inside the shaft may have become unseated during transport. Fully compress the shaft, remove the base bolt, firmly tap the chrome end on a hard surface to reseat the nut, then reassemble and tighten the bolt.

Do not add lubricant to the outside of the shaft. Follow the model-specific troubleshooting instructions or contact Manhasset UK for guidance.

Yes, in fact Manhasset UK specialises in providing large quotes for schools and venues. Send your requirements to sales@frederickhyde.com and we will get back to you promptly.

Yes. Availability varies across the wider Manhasset range, but the UK team can check whether a specialist model, finish or replacement part can be ordered.

Yes. Frederick Hyde Music Distribution handles UK trade and dealer enquiries. Email sales@frederickhyde.com or call 01428 653381.

Email sales@frederickhyde.com or call 01428 653381. Our friendly team can help with product selection, availability, quotations and after-sales support.

The Frederick Hyde sales team is available Monday to Friday, 9:00am to 5:30pm, excluding public holidays.

Provide the stand model, approximate age, the part required, photographs of the stand and your delivery location. This helps the team identify the correct component.

Contact the supplying retailer first, or email sales@frederickhyde.com with proof of purchase, the model number, a description of the fault and clear photographs.

A durable product that can be maintained and repaired may need replacing far less often. That long service life can reduce waste compared with repeatedly buying short-lived stands.

Yes. Replacement desks, shafts, bases and other components are available for many models, so damage to one part does not necessarily mean replacing the complete stand.

Yes. The same qualities that help in a school, including stability, simple adjustment and durability, are equally valuable in studios, orchestras, theatres and concert halls.

Yes. The broad desk and deep ledge can support folders, books, tablets and rehearsal notes, provided the total load stays within the stand's rated capacity.

The people making the stands have a direct stake in the company and its reputation, reinforcing the care, consistency and pride behind production.

Classic models use a heavy-gauge welded steel base designed to provide dependable balance and withstand repeated institutional use.

It allows the desk angle to be changed smoothly and held in position without loosening and retightening a separate handle.